Samson Servo 200

Peace of mind, power for your speakers. The Samson Servo 200 Power Amp delivers completely stable operation, along with all the power you need to fill your venue, ensuring you get pristine sound quality, every time. 1/4'' jack, RCA, and binding post connectors cater to a variety of different inputs and outputs, giving you a full range of connectivity, no matter what the situation. Choose between 200W bridged mono for one powerful channel, or spread your sound into two 100W stereo channels. Monitoring is easy thanks to the precise 10-segment LEDs on each channel. Whether you're listening out front or plugging headphones directly into the unit, you'll have full control of your sound.

Key Features

• All the power you need for speaker chains, playback, and studio monitors
• Flexible operation modes with 100W stereo and 200W mono output
• Connect to a range of gear via 1/4" and RCA inputs/outputs
• Monitor your levels with ease thanks to 10-segment LEDs on each channel

Superior power performance

Everything you need to power your setup. The Servo 200 is a perfect fit for almost any application. Whether it’s small to medium-sized speaker chains, playback, or studio monitors, you’ve got a full range of connectivity options to choose from. It’s as easy as plug-in and play. The rear panel includes 1/4-inch balanced and RCA input connectors, as well as a 5-way binding post and 1/4-inch speaker outputs. The Servo 200 delivers performance as you’ve never experienced before with unparalleled ease of use.

The reliability you deserve. The Servo 200 promises optimal performance and protection of all connected components. Thanks to 4-stage power protection circuitry, you'll never have to worry about nasty surprises stopping your show. And it all fits neatly into a dual 19" rack space. Comprehensive power.

Features

• Reference class audio performance from a servo-controlled power amplifier
• Fits seamlessly into 19” rack units with 2U of available space
• All the power you need with 100W per side at 4 ohms stereo
• Huge 200W of power at 8 ohms (bridged mono)
• Monitor your levels with precision thanks to 10-segment, 3-colour LED meters
• Protected against overloading with 4-stage power protection
• Full range of connectivity with a headphone jack, ¼” jack, and RCA input connectors
• Setup with ease thanks to a 5-way binding post and ¼” outputs
• Robust, lightweight, and durable design

Specifications

• Wattage:
• Stereo at 8 Ohms: 66 Watts x 2
• Stereo at 4 Ohms: 100 Watts x 2
• Bridged mono at 8 Ohms: 200 Watts
• Signal to Noise Ratio (20Hz-20k): 102dB
• Distortion (SMPTE-IM): 0.05%
• Input sensitivity at 8 Ohms: 1.24V(4dBu)
• Voltage Gain: 32dB
• Output Circuitry Class: AB
• AC Power:
• at 1/8 rated power 4 Ohms, max: 0.4A
• at 1/3 rated power 4 Ohms, max: 1.1A
• at rated power 4 Ohms, max: 3.3A
• Distortion (typical at 4 Ohms) 20Hz-20kHz, 10dB:
• below rated power: 0.01%
• 1kHz, rated power: 0.1%
• Frequency Response at 8 Ohms, 1Watt, 20Hz-20kHz: +0/-0.5dB
  
• Damping Factor (400Hz): 280
• Input Impedance:
  
• Unbalanced: 15k Ohm
• Balanced: 30k Ohm
• Input Clipping: 10Vrms (22dBu)
  
• Cooling: Continuously variable speed, fan-forced air
• Connectors:
  
• Input: RCA unbalanced and 1/4”(6.3mm) TRS, balanced
• Output: 5-way Binding post and 1/4” Phone
• Controls: AC power switch, Channel 1 and 2 volume
  
• Indicators: Power on (blue), Protection(amber), Signal (green) for each Ch., Peak(red) for each Ch. Level: -24 dB to +4 dB (PEAK).
• Protection: Short circuit, Thermal, Current limit, DC offset, Current inrush, RF protection, Turn on/Turn off muting
• Power Requirements: 115/230,240VAC,50/60Hz
• Dimensions (W x H x D): 483mm x 89mm x 297mm
• Net Weight: 6.82 kg