Audio Technica ATW-2110C Wireless Receiver & Transmitter
The Audio Technica ATW-2110C 2000 Series Beltpack System is a top-of-the-line wireless audio system that offers exceptional sound quality and versatility. With the ATW-R2100b receiver and ATW-T210a body-pack transmitter, this system is perfect for professional audio applications.
This system is designed with convenience in mind, allowing you to easily connect a microphone or cable with a cW-style locking 4-pin connector. This makes it easy to set up and use, saving you time and effort.
The Audio Technica ATW-2110C 2000 Series Beltpack System is part of the renowned 2000 Series, known for its exceptional performance and reliability. This system is built to last and can withstand even the most demanding audio environments.
With its wireless capabilities, this system offers freedom of movement and eliminates the need for cumbersome cables. This makes it perfect for live performances, events, and other applications where mobility is crucial.
Experience the power and quality of Audio Technica with the ATW-2110C 2000 Series Beltpack System. Whether you're a professional audio engineer or a musician, this system is sure to exceed your expectations and deliver exceptional sound every time.
Specifications
Overall System
- Operating Frequencies:
- UHF Band D: 656.125 to 678.500 MHz
- Band I : 487.125 to 506.500 MHz
- Modulation Mode: FM
- Maximum Deviation: ±40 kHz
- Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
- Operating Range:
- 100 m (300'), typical
- Open range environment with no interfering signals.
- Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
- Operating Temperature Range:
- 5º C to 45º C (41º F to 113º F)
- Battery and LCD performance may be reduced at very low temperatures.
- Number Of Channels: 10 total
Handheld Transmitter
- RF Power Output High: 30 mW; Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Microphone Element: Dynamic cardioid
- Battery Type:
- Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
- Recharging power for NiMH batteries (with ATW-CHG2)
- U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
- Other world areas: 3.2 V DC, 320 mA x2
- Battery Life:
- High: 7 hours (alkaline)
- Low: 9 hours (alkaline)
- Depending on battery type and use pattern.
- Dimensions: 232.0 mm (9.13") long, 48.0 mm (1.89") diameter
- Net Weight: 252 g (8.9 oz), without batteries
- Accessories Included:
- AT8456a Quiet-Flex stand clamp
Body Pack
- RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Battery Life:
- High: 7 hours (alkaline)
- Low: 9 hours (alkaline)
- Depending on battery type and use pattern.
- Battery Type Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
- Recharging power for NiMH batteries (with ATW-CHG2)
- U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
- Other world areas: 3.2 V DC, 320 mA x2
- Dimensions: 66.0 mm (2.60")W x 22.5 mm (0.89")D x 92.3 mm (3.63")H
- Input Connections:
- Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Net Weight: 81 g (2.9 oz), without batteries
- Spurious Emissions: Following federal and national regulations
Receiver
- Receiving System: True diversity
- Image Rejection: 60 dB nominal, 55 dB minimum
- Antenna Input: BNC-type, 50 ohms
- Bias voltage: 12V DC, 60 mA, each
- Dimensions: 210.0 mm (8.27")W x 162.2 mm (6.39")D x 44.0 mm (1.73")H (Not including BNC connectors or feet).
- Weight: 1.0 kg (35.3 oz), without accessories