Home > PA Equipment > Wireless Microphones >

  Shure PSM200
Shure PSM200 Wireless Personal Monitoring System
 
Education Web Price


Only: £479.00


Order Code: W-MIB027Y
Qty:

Description Price Match
 

Shure PSM200, Wireless Personal Monitoring System

The entry to professional in ear personal monitoring from Shure. This package contains SE-215-CL Sound Isolating earphones, a P2R receiver and a P2T transmixer.

Using a Shure monitoring system allows you to hear the music via your earphones at the exact time it is played. There can be a short delay in music coming out of the wedge, which can cause performers to play out of time. Wedge monitors will sound fine when standing in one position, but if you move to the left or right, that sound is likely to change. With in ear personal monitoring, the sound will be constant and comes with you, wherever you go. Using wedge monitors long term can also be damaging to your ears. Using Shure sound isolating earphones cuts out the sound around you leaving you to focus on playing in time.

Features:
  • Built-in audio limiter
  • Front mounted antenna
  • Two mic/line input channels for mix control
  • Built in headphone limiter
  • Volume control on bodypack receiver
  • 1/2 Rack space
Specifications:
  • RF Output Power: 10 - 30 mW (countryspecific)
  • Operating Distance: Up to 100 m
  • Harmonic distortion: 1.5 % typical
  • Signal-to-noise-ratio: 80 dB (A) typical
  • Listening mode: Mono
  • Compatible Systems per band (up to): 4
  • Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
  • Transmitter Outputs: 2x XLR split outputs
  • Wired Bodypack Option: Yes
  • Personal Mix Control: On transmitter
  • Remoteable Transmitter: No
  • Battery Life: Wired: 6 h; Wireless: 4 h
  • Frequency Response: 30 Hz - 12 kHz

  • Further technical specifications:

    PSM®200 System

    • RF Carrier Frequency Range: 518­-865 MHz (country dependent)
    • Modulation: FM +/- 35 kHz Deviation (Nominal)
    • Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F) 

    EP2T TransMixer

    • Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
    • Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
    • Connector Type: XLR/1/4-inch combo
    • Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
    • Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
    • Current: 170 mA maximum
    • Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
    • Net Weight: 370 g (13 oz.) 

    P2R Receiver

    • RF Sensitivity: 109 dBm typical
    • Squelch Threshold: 102 dBm typical
    • Antenna: Attached Whip
    • Audio Input Connector: Connector Type: 1/4-inch Mono
    • Impedance: 1 megohm
    • Maximum Input Level: LO = +0 dBu; HI = 10 dBu
    • Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
    • Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
    • Audio Output Connector: 1/8 inch (3.5 mm)
    • Minimum Load Impedance: 8 ohms
    • Net Weight: 100 g (3.52 oz.), less battery
    • Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

     SE215 Earphones

    • Frequency Range: 22Hz – 17.5kHz
    • Sensitivity: 107 dB SPL/mW (@ 1kHz)
    • Impedance: 20 Ohms (@ 1kHz)
    • Input Connector: 3.5mm (1/8”)
    • Colour: Clear 
    • Cable Length: 162 cm (64”)