Rode NTG2

The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles. The NTG-2 comes complete with a mount and windshield. The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.

Specifications:

• Acoustic principle: Line plus Gradient.
• Directional pattern: Super-Cardioid.
• Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
• Output impedance: 250 Ohms - phantom power, 350 Ohms - battery power
• Signal noise ratio din IEC 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
• Equivalent noise: 18 dB SPL (per IEC651, IEC268-15)
• Maximum SPL: 131 dB (@ 1% THD into 1 k')
• Sensitivity: -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
• Dynamic range din IEC 651: 113 dB (per IEC651, IEC268-15)
• Power supply voltage: 1.5 V Alkaline Battery or P48 Phantom
• Current consumption: 2.0 mA
• Battery life: >400 hours with fresh alkaline battery.
• Output connection: 3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)
• Weight with battery: 161 g approx. (5 oz.)
• Dimensions width: 278 mm
  Dimensions depth: 22mm
  Dimensions height: 22mm

GB-E7348EF4