Home > Recording > Monitoring >

  Presonus HP60
Presonus HP60 Headphone Amplifier
 
Education Web Price


Only: £229.00


Order Code: W-REB090K
Qty:

Description Price Match
 

Presonus HP60, Headphone Amplifier

The HP60 is more than just a half-dozen headphone amps, it’s a field-tested solution to a host of common headphone-monitoring problems. Each of the HP60’s six headphone amps has its own level control and puts out 150 mW of power.

The HP60 features two sets of line-level, stereo inputs that are routed to all six headphones, a Mix control that sets their relative levels for each headphone output, and a mute switch for each headphone. So you can feed the main control-room mix to channel A and the click to channel B and use the Mix controls to individually raise or lower the click relative to the main mix for each musician.

Features:

  • 6 screaming-loud (150 mW/channel) headphone amplifiers, each with:
    • Headphone level control
    • Mix control (blends signals from input pairs A and B)
    • Mute switch (mutes input pairs A and B)
    • Stereo external input with level control
    • Mono switch for external input
    • Stereo (L/R) line outputs
  • 2 stereo input channels (A and B)
  • Talkback-microphone input with:
    • Mic-level control
    • Talk button (momentary switch)
    • Footswitch jack for hands-free talkback operation
  • Input/Output
    • 4 balanced ¼” analog line inputs (L/R Mix input pairs A and B)
    • 6 stereo ¼” external analog line inputs (1 per channel) for “more me,” with trim controls
    • 6 stereo ¼” headphone outputs (front panel)
    • 6 stereo ¼” line outputs (1 per channel); carries a copy of the channel mix
    • 1 balanced XLR input for external dynamic talkback microphone
    • 1 ¼” footswitch jack for hands-free talkback operation
  • Physical
    • 1U 19” rack-mountable, rugged steel chassis
    • Internal power supply with standard IEC connector

Specifications:

Input A(2) ¼” TRS balanced 10k Ohms

Input B (2) ¼” TRS balanced 10k Ohms

External inputTRS stereo unbalanced 10k Ohms

Headphone amplifier output power 150 mW RMS (60 Ohms) per channel

Audio outputs¼” TRS stereo unbalanced per channel

Master controls Talk button, Talkback volume, Input A, Input B

Channel controls Headphone level, Mix A/B control, External input level, Mono, Mute

External talkbackXLR with TS external control jack

PowerIEC - factory configured for 115V or 230V

 Dimensions 1U - 19"(W) X 1.75" (H) X 5.5"

Weight 8.0 lbs.