Home > Recording > Recording Accessories >

  CableJoG AudioJog Pro 8
CableJoG AudioJog Pro 8 Cat 5e Network Cable Tester
 
Education Web Price


Only: £129.00


Order Code: W-REB562R
Qty:

Description Price Match
 

CableJoG AudioJog Pro 8, Cat 5e Network Cable Tester

Audio cable tester with SINGLE & DOUBLE ended testing. This is also a LAN cable tester and an Ethernet cable tester

Connectors:
  • 3, 4 & 5 Pole XLR Male & Female
  • 6.35mm Jack, stereo or mono
  • Single or Twin 4.4mm Bantam, stereo or mono
  • 3.5mm Jack, stereo or mono
  • 2, 4 & 8 Pole Speakon
  • DIN 3 & 5 (180°) & 8 Pole
  • MINI DIN 4 Pole (S Video)
  • RCA Phono
  • BNC
  • RJ45, Ethercon
  • USB A & B
  • 4mm Red & Black "banana"
Features:

There are 2 rows of 9 LED's corresponding to each of the possible connector pins of the AudioJog Pro 8 – Cat 5e Network Cable Testers and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option
There are 4 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes for AudioJog Pro 8 Cat 5e Cable Testers:
Double ended - both ends of the cable under test are plugged into AudioJoG Pro 8.
Single ended - one end of the network cable under test is plugged into AudioJoG Pro 8, the other into another AudioJoG Pro 8.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
Length: 203mm Width: 150mm Depth: 50mm
Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms.